LLDPE 沙特SABIC M200024高光泽塑料橡胶
- 价格: ¥11/千克
- 发布日期: 2020-10-16
- 更新日期: 2024-03-29
产品详请
品牌 |
工程原料
|
货号 |
236
|
特性级别 |
增强级|||透明级|||耐磨|||高强度|||高流动|||高滑动|||高光泽|||
|
牌号 |
M200024
|
型号 |
M200024
|
加工级别 |
注塑级|||脱模级|||
|
品名 |
LLDPE
|
外形尺寸 |
25kg
|
产品用途 |
家用电器
|
用途级别 |
汽车部件|||电子电器部件|||板材级|||医用级|||家电部件|||电线电缆级|||电动工具配件|||
|
生产企业 |
123
|
是否进口 |
是
|
LLDPE 沙特SABIC M200024 高光泽
SABIC® LLDPE M200024
线性低密度聚乙烯
Saudi Basic Industries Corporation (SABIC)
产品说明:
SABIC® LLDPE M200024 is a linear low density polyethylene copolymer injection moulding grade with a narrow molecular weight distribution. It has been typcially designed to have good low temperature toughness, stress crack resistance (ESCR) and gloss.
Typical applications.
Injection Molding: SABIC® LLDPE M200024 is typcially used for injection moulding of large items where high flow and fast cycles are required such as for example housewares, trash cans, automotive parts, lids and large industrial containers.
Masterbatch Compounding: SABIC® LLDPE M200024 is typically used for masterbatch applications like blow moulding, injection moulding and film extrusion. It can be used for for masterbatches with very high carbon black, titanium dioxide or pigment content.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
SABIC® LLDPE M200024 物性表
基本信息 |
|
---|
特性 | 低密度 低温韧性 高 ESCR(抗应力开裂) 高光 共聚物 快的成型周期 流动性高 窄分子量分布
|
用途 | 废物容器 复合 盖子 工业容器 家用货品 母料 汽车领域的应用
|
加工方法 | |
物理性能 | 额定值 | 单位制 | 测试方法 |
---|
密度 | 0.924 | g/cm3 | ASTM D1505 |
熔流率(熔体流动速率) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
抗环境应力开裂 (100% Igepal CO-630, 模压成型, F50) | 24.0 | hr | ASTM D1693A |
硬度 | 额定值 | 单位制 | 测试方法 |
---|
肖氏硬度 (邵氏 D, 模压成型) | 55 |
| ASTM D2240 |
机械性能 | 额定值 | 单位制 | 测试方法 |
---|
拉伸模量 - 1% 正割 (模压成型) | 315 | MPa | ASTM D638 |
抗张强度 |
|
| ASTM D638 |
屈服, 模压成型 | 12.0 | MPa | ASTM D638 |
断裂, 模压成型 | 8.50 | MPa | ASTM D638 |
伸长率 (断裂, 模压成型) | 450 | % | ASTM D638 |
冲击性能 | 额定值 | 单位制 | 测试方法 |
---|
悬壁梁缺口冲击强度 (23°C, 模压成型) | 540 | J/m | ASTM D256 |
热性能 | 额定值 | 单位制 | 测试方法 |
---|
脆化温度 | < -75.0 | °C | ASTM D746 |
维卡软化温度 | 94.0 | °C | ASTM D1525 1 |
注射 | 额定值 | 单位制 |
|
---|
加工(熔体)温度 | 193 到 232 | °C |
|
模具温度 | 5.00 到 30.0 | °C |
|