产品展厅

A3 H G10 50% 工程塑料原料

产品详请

Nilit Nilamid A3 H G10 50% Glass Reinforced PA66

Polymer,Thermoplastic,Nylon,Nylon 66,Nylon 66, 50% Glass Fiber Filled

Nilit

产品说明:

Description: Nilamid A3 H G10 (50% Glass Reinforced) is a high strength material, that is used for structural applications. It is easy to mould, and shows outstanding stiffness and creep resistance, even at elevated temperatures. It is used for highly loaded applications like high torque transmission housings, electrical cable holders and tensioners of ski bindings.
Key characteristics:

High stiffness

High strength

Good impact strength

Excellent thermal performance

Good creep resistance

Information provided by NILIT.

Nilit Nilamid A3 H G10 50% Glass Reinforced PA66 物性表

物理性能额定值 (公制) 额定值 (英制) 测试方法

密度 1.57 g/cc 0.0567 lb/in3 ASTM D792, ISO 1183

吸水率 0.50 % 0.50 % 23°C, 24h in H<sub>2</sub>O; sim. ISO 62

饱和吸水率 3.5 % 3.5 % sim. ISO 62

线性成型收缩率,Flow 0.0020 cm/cm 0.0020 in/in Euronil

线性成型收缩率，横向 0.0030 cm/cm 0.0030 in/in Euronil

机械性能额定值 (公制) 额定值 (英制) 测试方法

抗张强度(屈服) 220 MPa 31900 psi ISO 527, ASTM D638

伸长率 (断裂) 2.0 % 2.0 % ISO 527, ASTM D638

拉伸模量 16.5 GPa 2390 ksi ISO 527, ASTM D638

弯曲强度 310 MPa 45000 psi ISO 178, ASTM D790

230 MPa
@Temperature 90.0 °C
33400 psi
@Temperature 194 °F
ISO 178, ASTM D790

弯曲模量 15.0 GPa 2180 ksi ISO 178, ASTM D790

9.50 GPa
@Temperature 90.0 °C
1380 ksi
@Temperature 194 °F
ISO 178, ASTM D790

悬壁梁缺口冲击强度 13.0 kJ/m2
@Temperature -30.0 °C
6.19 ft-lb/in2
@Temperature -22.0 °F
ISO 180/1A

16.0 kJ/m2
@Temperature 23.0 °C
7.61 ft-lb/in2
@Temperature 73.4 °F
ISO 180/1A

简支梁无缺口冲击强度 7.00 J/cm2 33.3 ft-lb/in2 ISO 179

5.50 J/cm2
@Temperature -30.0 °C
26.2 ft-lb/in2
@Temperature -22.0 °F
ISO 179

简支梁缺口冲击强度 1.60 J/cm2 7.61 ft-lb/in2 ISO 179

1.30 J/cm2
@Temperature -30.0 °C
6.19 ft-lb/in2
@Temperature -22.0 °F
ISO 179

电气性能额定值 (公制) 额定值 (英制) 测试方法

介电强度 22.0 kV/mm
@Thickness 2.00 mm
559 kV/in
@Thickness 0.0787 in
ASTM D149

Comparative Tracking Index 350 V
@Thickness 3.20 mm
350 V
@Thickness 0.126 in
Sol. B; IEC 112, UL 746A

500 V
@Thickness 3.20 mm
500 V
@Thickness 0.126 in
Sol. A; IEC 112, UL 746A

热性能额定值 (公制) 额定值 (英制) 测试方法

工作温度, Air 115 °C 239 °F 20,000 hr; IEC 216

载荷下热变形温度(0.46 MPa) 262 °C 504 °F ISO 75, ASTM D648

载荷下热变形温度(1.8 MPa) 257 °C 495 °F ISO 75, ASTM D648

维卡软化温度 257 °C 495 °F 49 N; ISO 306, ASTM D1525

260 °C 500 °F 9.8 N; ISO 306, ASTM D1525

可燃性(UL94) HB
@Thickness 0.800 mm
HB
@Thickness 0.0315 in

HB
@Thickness 1.60 mm
HB
@Thickness 0.0630 in

HB
@Thickness 3.20 mm
HB
@Thickness 0.126 in

极限氧指数 27 % 27 % ASTM D2863

灼热丝易燃指数 650 °C
@Thickness 3.20 mm
1200 °F
@Thickness 0.126 in
Glow Wire Flammability Index; IEC 694-2-12

650 °C
@Thickness 0.800 mm
1200 °F
@Thickness 0.0315 in
Glow Wire Flammability Index; IEC 694-2-12

加工性能额定值 (公制) 额定值 (英制) 测试方法

射嘴温度 285 - 300 °C 545 - 572 °F

1区 270 - 290 °C 518 - 554 °F hopper

2区 275 - 290 °C 527 - 554 °F

3区 285 - 300 °C 545 - 572 °F

4区 285 - 300 °C 545 - 572 °F

加工（熔体）温度 280 - 300 °C 536 - 572 °F Do not melt above 300°C

模具温度 100 - 120 °C 212 - 248 °F Preferred

干燥温度 80.0 - 85.0 °C 176 - 185 °F

干燥时间 4 hour 4 hour

注射压力 70.0 - 100 MPa 10200 - 14500 psi

材料描述测试方法

Clamping Force in tons, 0.7 times the projected surface area in cm2

Flammability Rating B28 FMVSS No. 302, 355x100x1 mm

Heat Resistance - Ball Test OK at 125°C, IEC 309

OK at 165°C, IEC 309

Holding Pressure 90 Mpa